Giờ làm việc: từ 8:30AM đến 5:30PM
  • Bảo mật thông tin

    100% thông tin bảo mật

  • Giao hàng nhanh

    Trong 3 ngày làm việc

  • Liên hệ mua hàng

    Sales: 0936.345.985 || 0982.202.292

  • Hình thức thanh toán

    Tiền mặt và chuyển khoản

Keo trám trét 3M 560

Nhà sản xuất: 3M
Mã sản phẩm: KAT_3M_560
Tình trạng: Còn hàng
Giá:
Liên hệ

Chất trám khe hở chống thấm công nghiệp 3M 560
 
3M™ Polyurethane Adhesive Sealant 560  là chất trám trét nhanh khô, dùng trám trét hoặc bịt kín các khe hở, chống thấm trên nhiều chất liệu khác nhau. Trong nhiều trường hợp, có thể sử dụng sản phẩm như 1 loại keo để kết dính các bề mặt.

Thông tin sản phẩm: 

  • Màu: Trắng, xám
  • Thời gian khô bề mặt: 50 – 90 phút
  • Tốc độ khô bề mặt: > 4mm/24h
  • Độ giãn dài: >600%

Lĩnh vực ứng dụng:

Dùng để trám khe, làm ron nhôm kính và bê tông, kết dính giũa đá với kim loại, gỗ, nhưa, kính…Khi kho có độ dàn hồi, giản nỡ tốt, kháng UV, dùng làm ron trong ô tô.

Đặc tính kỹ thuật:
  • Adhesive Type
    Polyurethane
  • Application Method
    Hand or pressure caulk
  • Brand
    3M
  • Color
    Black, Gray, White
  • Consumer Label
    No
  • Elongation
    >300 Percent
  • Full Cure
    >4 mm/24 hr
  • Hardness
    55 Shore A
  • Industries
    Construction, General Industrial, Specialty Vehicle, Transportation
  • Modulus at 100%
    145 Pound-Force Per Square Inch
  • Physical Form
    Medium paste
  • Product Form
    Cartridge, Gallon, Package
  • Solids Weight Percent (Approximate)
    90 Percent
  • Substrate 1
    ABS, Acrylic, Aluminum, Bare Metal, Clear Coats, Engineered Thermoplastics, Epoxy - Fiber Reinforced, Fiberglass Insulation, Fiberglass Reinforced Plastic, Foam, Glass, Glass & Ceramics, High Pressure Laminate, High Surface Energy, (400-1100 Dynes/cm), High Surface Energy, (400-1100 Dynes/cm)Metals,Glass, Medium Surface Energy, (38-39 Dynes/cm), Medium-High Surface Energy, (42-50 Dynes/cm), Medium-Low Surface Energy, (36-37 Dynes/cm), Metal, Metal (Painted), Metal (Unpainted), Neoprene, Nylon, Nylon - Fiber Reinforced, Paint, Painted Surface, Easy-to-Bond (HSE), Painted Textured Surfaces, Paints (Powder Coat, Painted Metal, Composite Panel), Plastic, Plastic, Easy-to-Bond (HSE), Plastics (ABS, PVC, Acrylic), Plastics (Flexible Vinyl), Plastics (High Performance Nylon), Plastics: HSE, MSE (ABS, Acrylic, Polycaronate, Nylon), Polyester, Polystyrene Foam, PVC, Rigid Foam (Beadboard Styrene), Rigid Foam (Urethane), Rubber (Except EPDM), Stainless Steel, Stone, Thermoplastics, Thermosets - Fiber Reinforced, Vinyl Plasticized, Wood, Wood & Hardboard
  • Substrate 2
    ABS, Acrylic, Aluminum, Bare Metal, Clear Coats, Engineered Thermoplastics, Epoxy - Fiber Reinforced, Fiberglass Insulation, Fiberglass Reinforced Plastic, Foam, Glass, Glass & Ceramics, High Pressure Laminate, High Surface Energy, (400-1100 Dynes/cm), High Surface Energy, (400-1100 Dynes/cm)Metals,Glass, Medium Surface Energy, (38-39 Dynes/cm), Medium-High Surface Energy, (42-50 Dynes/cm), Medium-Low Surface Energy, (36-37 Dynes/cm), Metal, Metal (Painted), Metal (Unpainted), Neoprene, Nylon, Nylon - Fiber Reinforced, Paint, Painted Surface, Easy-to-Bond (HSE), Painted Textured Surfaces, Paints (Powder Coat, Painted Metal, Composite Panel), Plastic, Plastic, Easy-to-Bond (HSE), Plastics (ABS, PVC, Acrylic), Plastics (Flexible Vinyl), Plastics (High Performance Nylon), Plastics: HSE, MSE (ABS, Acrylic, Polycaronate, Nylon), Polyester, Polystyrene Foam, PVC, Rigid Foam (Beadboard Styrene), Rigid Foam (Urethane), Rubber (Except EPDM), Stainless Steel, Stone, Thermoplastics, Thermosets - Fiber Reinforced, Vinyl Plasticized, Wood, Wood & Hardboard
  • Substrates
    ABS, Acrylic, Aluminum, Bare Metal, Clear Coats, Fiberglass Insulation, Fiberglass Reinforced Plastic, Foam, Glass, Glass & Ceramics, High Pressure Laminate, High Surface Energy, (400-1100 Dynes/cm), Medium Surface Energy, (38-39 Dynes/cm), Medium-High Surface Energy, (42-50 Dynes/cm), Medium-Low Surface Energy, (36-37 Dynes/cm), Metal, Metal (Painted), Metal (Unpainted), Neoprene, Nylon, Paint, Painted Surface, Easy-to-Bond (HSE), Painted Textured Surfaces, Paints (Powder Coat, Painted Metal, Composite Panel), Plastic, Easy-to-Bond (HSE), Plastics (ABS, PVC, Acrylic), Plastics (Flexible Vinyl), Plastics (High Performance Nylon), Plastics: HSE, MSE (ABS, Acrylic, Polycaronate, Nylon), Polystyrene Foam, PVC, Rigid Foam (Beadboard Styrene), Rigid Foam (Urethane), Rubber (Except EPDM), Stainless Steel, Stone, Vinyl Plasticized, Wood, Wood & Hardboard
  • Tack Free Time
    1 Hour
  • Tensile Strength
    580 psi
  • US Govt Contract Number
    GS-21F-0075x
  • Volatile Organic Compounds (VOCs)
    29 Grams Per Litre, 56 Grams Per Litre
  • Volume
    10.5 Fluid Ounce (US), 5 gal, 50 gal
  • Volume (metric)
    400 ml, 600 ml
Tài liệu kỹ thuật